Skip to content
Trimatrix Buildtech India Pvt. Ltd.

60 mm uPVC sliding system with reinforced sliding mechanism

Sliding Royal 60

A deeper 60 mm sliding frame with a reinforced, dual-track mechanism and heavy-duty tracks for larger windows and balcony doors.

Illustration

Overview

Sliding Royal 60 is the heavier-duty of Trimatrix's two uPVC sliding systems. Its 60 mm frame depth and reinforced sliding mechanism are intended for larger panels, balcony doors and openings that see daily use.

Sliding systems save space — nothing swings into the room or out over a balcony — and suit wide openings where a view matters.

System concept
A 60 mm-deep frame with a dual-track layout: two sliding panels running past each other on separate tracks.
Sliding mechanism
Reinforced sliding mechanism on heavy-duty tracks for smooth movement under larger panel weights.
Design advantages
Space-saving operation, wide clear views and good ventilation control by partial opening.
Ideal customer
Apartments and villas needing large balcony windows or sliding doors, and commercial interiors with wide openings.

Key features

What defines Sliding Royal 60

  • 0160 mm frame depth
  • 02Reinforced sliding mechanism
  • 03Heavy-duty tracks
  • 04Dual-track system
  • 05Smooth sliding operation
  • 06Contemporary aesthetics

Configurations

Ways to configure it

2-panel sliding window

Dual-track layout.

Sliding balcony door

Larger panels for balcony and terrace access.

Sliding + fixed combinations

Configuration options: to be confirmed by Trimatrix.

Mesh / insect screen track

Availability: to be confirmed by Trimatrix.

Options

Glass, hardware & finishes

Glass options

Glass is selected for panel size, safety and comfort. Typical options discussed:

  • Clear float / toughened single glazing
  • Double-glazed units (DGU) for heat and noise control
  • Laminated safety glass
  • Tinted, reflective or frosted glass

Hardware

Sliding hardware:

  • Rollers sized to panel weight
  • Sliding locks and interlocks
  • Hardware brand and roller load rating: to be confirmed by Trimatrix

Available finishes

Finish palette for this series:

  • White (standard uPVC)
  • Woodgrain / colour laminates — availability to be confirmed by Trimatrix

Technical specifications

Specification to be confirmed based on project configuration where marked.

Sliding Royal 60 specifications
SpecificationValue
System typeHorizontal sliding, dual-track
Frame depth60 mm
MechanismReinforced sliding mechanism, heavy-duty tracks
Profiles in seriesTo be confirmed by TrimatrixBeing confirmed by Trimatrix
Maximum panel sizeTo be confirmed by Trimatrix
Maximum glass thicknessTo be confirmed by Trimatrix
Steel reinforcementTo be confirmed by Trimatrix
Air / water / wind performance (installed)To be confirmed by TrimatrixRequires system-level testing

Profile schedule

Profile schedule

The Sliding Royal 60 profile schedule (codes, sizes and weights) will be published here once supplied by Trimatrix.

Performance

Profile material test results

43MPa

Tensile strength

Resistance to being pulled apart — an indicator of everyday durability of the profile material.

Shriram Institute report

0.5%

Heat reversion

Dimensional change after heating (method reference: EN 12608). Low values mean the profile stays dimensionally stable in heat.

Shriram Institute report

0.234W/mK

Thermal conductivity

How readily heat passes through the material. This is a material property, not a window U-value.

Shriram Institute report

73.37kJ/m²

Notched Charpy impact

Energy absorbed when a notched sample is struck — a measure of impact toughness.

Shriram Institute report

V-0

Vertical flammability (UL-94)

Classification of how a sample stops burning in a vertical test. V-0 does not mean the product is fireproof.

Shriram Institute report

Material test result ≠ installed system performance. These are laboratory results for samples of the uPVC profile material, valid under the stated test conditions. They are not a guarantee of installed window performance, which also depends on glass, hardware, reinforcement, fabrication and installation.

Applications

Ideal for: Larger sliding windows and doors that need a sturdier frame and track.

  • Balcony windows and doors
  • Living rooms
  • Large bedroom windows
  • Commercial interiors
  • Terrace access

Installation

  1. 01Site survey and final opening measurement.
  2. 02Frames fixed square and plumb, with fixings and packers suited to the wall type.
  3. 03Perimeter gap sealed with appropriate foam and weather sealant.
  4. 04Sashes, glass and hardware fitted, adjusted and checked for smooth operation.
  5. 05Final inspection and handover with care instructions.

FAQ

Should I choose casement or sliding windows?

Casement windows close against continuous seals, so they usually perform better for airtightness, rain and noise. Sliding windows save space and suit wide balcony openings. Many homes use both: casements in bedrooms facing the road, sliders on balconies.

What glass options are available?

Options discussed at specification include clear and toughened single glazing, double-glazed units (DGU), laminated safety glass, and tinted, reflective or frosted glass. The right choice depends on heat, noise, safety and privacy needs. Maximum glass thickness is confirmed for each system and configuration.

Can windows and other products be customised?

Yes. Windows and doors are fabricated to each opening's dimensions, and configuration, glass and hardware are selected per project. Railings, façades, fins and louvers can be developed from your architect's drawings. Limits such as maximum panel sizes are confirmed per system during specification.

How do I maintain uPVC windows?

Clean frames with a soft cloth and mild soap solution, keep sliding tracks and drainage slots free of dust, and lightly lubricate hardware periodically. Avoid abrasive pads and solvents.

Do you handle installation?

Yes. Installation and site coordination are part of the Trimatrix project workflow, from final measurement to handover. The exact installation scope is confirmed in your quotation.

Related

Other systems in the range

Compact 55 mm uPVC sliding system with minimal sightlines

Sliding Premium 55

A compact 55 mm sliding profile optimised for a high glass-to-frame ratio — more view, less frame.

  • Compact 55 mm depth
  • Minimal sightlines
  • High transparency
  • Precision engineering

Applications: Apartment windows · Bedrooms and kitchens · Renovation and replacement

Premium outward-opening uPVC system

Casement Premium Series

Side-hung outward-opening windows and doors with weather-tight sealing — the most complete profile family in the Trimatrix range.

  • 15 profile options
  • Thermal efficiency
  • Weather-tight sealing
  • Smooth operation

Applications: Bedrooms and living rooms · Road-facing and high-floor apartments · Villas and bungalows

Start a conversation

Get a quote for Sliding Royal 60

Tell us what you're building. We'll help you choose the right solution.

Prefer to talk? Call +91 9220420757 or email info@trimatrixbuildtech.com.

Call WhatsApp Get Quote